ARMGUARD SECURITY & COMMUNICATIONS

Security Sensors

Honeywell provides a sensor line that’s

unsurpassed for quality, design and performance.

Our field-proven, installation-friendly products,

including PIRs, magnetic contacts, DUAL TECs®

and FlexGuard®, the world's best-selling line of

glassbreak detectors, extend the boundaries of

sensor design and are rigorously challenged in

state-of-the-art test rooms built to exceed the

toughest SIA standards.

THIS SECTION INCLUDES:

Motion Detectors

DUAL TEC

PIRs

Accessories

– V-Plex Motions

Access Control Sensors

Environmental Sensors

Photoelectric Beams

Seismic Vibration Sensors

Glassbreak Detectors

Indoor Sounders

Sounding Devices

Siren Drivers, Bells and Boxes

Surface Mount Contacts

Recess Mount Contacts

Commercial Contacts

V-Plex Contacts

Tamper Switches, Brackets and

Pre-Wire Plugs

Hold-Up Switches

Strobes and Power Supplies

79

Sensors DUAL TEC®

Honeywell offers a wide range of DUAL

TECsincluding sensors that provide up to 100 lbs.

of pet immunity, wall or ceiling versions and

anti-masking devices for high security applications.

Choose from hardwired, wireless or V-Plex polling

loop versions for the ultimate installation flexibility.

There is a DUAL TEC to suit any application, from

residential and commercial to the most robust

industrial environments.

DUAL TEC...

The Best of Both Worlds

By combining microwave and PIR

technologies, Honeywell’s DUAL TEC

sensors offer you the best of both

worldssuperior detection and fewer

false alarms.

Imagine never having to compromise

between performance and false alarm

prevention again. More dealers are

choosing Honeywell’s DUAL TEC

sensors for this very reason.

The winning combination of microwave

and PIR technologies enable the

sensors to actually distinguish between

real intruders and other environmental

conditions. For an alarm to occur with a

DUAL TEC, both the PIR and the

microwave sensor must confirm each

other and detect an intruder within the

defined protection area. The result?

Optimum performance and minimal

false alarms.

www.securitysystemslosangeles.us

1-877-518-6857

80

Sensors MOTION DETECTORS

HARDWIRED DUAL TEC PIR/MICROWAVE

Honeywell offers the most comprehensive selection of motion detectors in the industry.

From traditional PIRs to DUAL TECs, we have the right motion detector to meet any installation

challenge in hardwired, wireless or V-Plex polling loop versions.

DT900

Long Range Anti Mask DUAL TEC

Range: 90' x 70' and 50' x 40' selectable

Mirror optics

Dual coverage patterns - selectable

Queue Logic event processing

Selectable sensitivity modes

Active infrared anti-mask system

Self-test and continuous supervision

6' to 12' mounting height

Zero Clearance bug guard

Tampered

• Form C Relay

Temperature Compensation

ALSO AVAILABLE:

DT901 - without anti-mask

Top View

Side View

DT6100STC

Long Range DUAL TEC

• Range: 100' x 20'

Map Signal Processing

Temperature Compensation

• Fluorescent Light Filter

Form C Relay

Adjustable microwave and PIR settings

• Supervised microwave and PIR

Trouble output

Side View

81

COMMERCIAL

DT906

Long Range Anti Mask DUAL TEC

Range: 200' x 15' and 120' x 10'

Mirror Optics

Dual coverage patterns - selectable

Queue Logic event processing

Selectable sensitivity modes

• Active infrared anti-mask system

Self-test and continuous supervision

6' to 12' mounting height

Zero Clearance bug guard

Tampered

Form C Relay

Temperature Compensation

ALSO AVAILABLE:

DT907 - without anti-mask

Top View

Side View

DETECTORS

PIR/MICROWAVE

DT7550C

Anti-Mask DUAL TEC

Motion Sensor

Range: 50' x 60'

Form C Relay

Advanced DualCore Signal Processing

• K-Band technology for better pattern

containment and shaping

Supervision-microwave, PIR and

temperature compensation

Uniform sensitivity optics

Digital adaptive microwave thresholds

Digital fluorescent light filter

Anti-mask detection

• Dual Slope Temperature

Compensation

Patented Zero Clearance Black

Bug Guard

Patented mirror look down

Trouble output relay

Perfect when high security and

system integrity are important

Top View

Side View

Sensors MOTION

HARDWIRED DUAL TEC

COMMERCIAL

DT6360STC

Ceiling Mount DUAL TEC

Range: 50' diameter 360° coverage

8' to 16' mounting height

DualCore Micro-Based Processing

Digital fluorescent light filter

Surface mount or flush mount

Front and rear tamper switches

Selectable pulse count

• Dual Slope Temperature

Compensation

Top View

Side View

Top View

Side View

www.securitysystemslosangeles.us

DT7450

Commercial DUAL TEC

Motion Sensor

Range: 50' x 60'

Advanced DualCore Signal Processing

K-Band technology for better pattern

containment and shaping

Supervision-microwave, PIR and

temperature compensation

Uniform sensitivity optics

Digital adaptive microwave thresholds

Digital fluorescent light filter

• Dual Slope Temperature Compensation

Patented Zero Clearance Black

Bug Guard

Patented mirror look down

ALSO AVAILABLE:

DT7450C - Form C Relay

Top View

Side View

82

Sensors MOTION DETECTORS

HARDWIRED DUAL TEC PIR/MICROWAVE

DT7235T

DUAL TEC Motion Sensor

Range: 35' x 40'

100 lb. animal immunity

No adjustments to set

K-Band technology for better

pattern containment and shaping

Sturdy, attractive housing

Uniform sensitivity optics

Temperature compensation

Patented Zero Clearance Black

Bug Guard

Patented mirror look down

Microwave supervision

Top View

Side View

83

COMMERCIAL/RESIDENTIAL

DT7435

DUAL TEC Motion Sensor

Range: 35' x 40'

100 lb. animal immunity

• Advanced DualCore Signal Processing

K-Band technology for better pattern

containment and shaping

Uniform sensitivity optics

Digital adaptive microwave thresholds

Digital fluorescent light filter

• Dual Slope Temperature Compensation

Patented Zero Clearance Black

Bug Guard

Patented mirror look down

High security lens included

ALSO AVAILABLE:

DT7435C - Form C Relay

Top View

Side View

DUAL TEC FAMILY FEATURE CHART

DT7000 Series

DT6 Series

DT9 Series

Wireless

Sensors

50' x 40'

90' x 70'

Queue

Event

Logic

Mirror

X

Adv

DT900 only

•••

C

3LEDs

6' to 12'

0 to 49

10 - 15

50

Included

120' x 10'

200' x 15'

Queue

Event

Logic

Mirror

X

Adv

DT906 only

•••

C

3LEDs

6' to 12'

0 to 49

10 - 15

50

Included

FEATURES

Pet Immune to 100 lbs.

Coverage Pattern

Signal Processing

Optical Technology

Microwave Frequency Band

Microprocessor

Environmental Adaptation

Temperature Compensation

Digital Fluorescent Filter

Analog Fluorescent Filter

Anti-Masking

Walk Test Mode/LED Disable

PIR Sensitivity Adjustment

Microwave Adjustment

Vertical/Horizontal Adjustment

Trouble Output

Tamper Switch(es)

Alarm Relay Forms

LED Indicators Microwave

PIR Supervision

Recommended Mtg Height

Operating Temperature (°C)

Input voltage (VDC)

Maximum Current (ma)

Swivel Bracket Options

35' x 40'

50' x 60'

50' x 60'

Dual Core

Dual Core

Dual Core

Uniform

Uniform

Uniform

Sens

Sens

Sens

K

K

K

Adv

Adv

Adv

A,C

A,C

C

Tri-Color

Tri-Color

Tri-Color

7' 6"

7' 6"

7' 6"

-10 to 55

-10 to 55

-10 to 55

7.5 - 1 6

7.5 - 1 6

7.5 - 1 6

30

35

40

SMB-10

SMB-10

SMB-10

SMB-10T

SMB-10T

SMB-10T

50' x 60'

35' x 40'

Dual Core

Uniform

Sens

K

Adv

RF

Tri-color

7' to 9'

-20 to 55

4 AA batteries

N/A

SMB10

SMB10C

35' x 40'

Std

Uniform

Sens

K

Std

A

1LED

7' 6"

-10 to 55

7.5 - 1 6

25

SMB-10

SMB-10T

40' x 40'

60' x 60'

100' x 20'

50' Diam

MAP

MAP

MAP

MAP

Std

Std

Std

Std

X

X

X

X

Std

Std

Std

Adv

C

C

C

C

3LEDs

3LEDs

3LEDs

3LEDs

7' 6"

7' 6"

7' 6"

8' to 16'

0 to 49

0 to 49

0 to 49

0 to 49

10 - 12.9

10 - 12.9

10 - 12.9

10 - 14.5

35

35

35

40

SMB-10

SMB-10

SMB-10

SMB-10T

SMB-10T

SMB-10T

84

1-877-518-6857

Pet Immune to 100 lbs.:

Sensor is immune to pets and other

animals with combined weight of 100 lbs.

when installation guidelines for pet

immunity are followed.

Coverage Pattern:

Length by width of area protected.

Signal Processing:

Analysis performed on PIR and

microwave signals to determine

alarm conditions.

DualCore: Signals are analyzed in

multiple domains, including amplitude,

time, frequency and duration. Supports

functions including diagnostics and

other advanced false alarm features.

C3: Correlates data from both

channels simultaneously, instead of

independently processing each

MAP: Timing and sequence of signals

are compared to settings for specific

environments to qualify each channel

individually

Queue Event Logic: Pulse counting

while looking for specific sequences

of events

Advanced: Pulse counting with timing

relationships

Standard: Basic pulse counting

Optical Technology:

Technology used to collect infrared

radiation for PIR processing.

Uniform Sensitivity: Fresnel lens that

provides the same sensitivity at the

edge of the pattern as exists directly in

front of the sensor

Split-Zone: Zones are split into two

sub-zones where each sub-zone has

half the sensitivity of a regular zone,

requiring targets to be in both zones

for an alarm

Standard: Basic Fresnel lens

Mirror: Basic mirror optics

Microwave Frequency Band:

Frequency at which the microwave

signal is radiated and received.

Higher frequencies generally penetrate

non-metallic objects less than lower

frequencies.

S-Band: 2.54 GHz

X-Band: 10.525 GHz

K-Band: 24.125 GHz

Sensors DUAL TEC FAMILY FEATURES

Trouble Output:

Separate output used to indicate

supervision failures and/or anti-mask

detection to the control panel.

Alarm Relay Forms:

Type of output relay used to signal panel

when an intrusion is detected.

Form A: Two-terminal relay with

Normally Closed output when

energized

Form C: Three-terminal relay with both

Normally Closed and Normally Open

outputs when energized

LED Indicators:

Light Emitting Diodes used to provide

visual feedback about alarm state,

supervision, walk test and other modes

of operation.

One LED: Single red LED

Three LEDs: Red, green, yellow LEDs,

usually with PIR and microwave channels

associated with a specific color

Microwave Supervision:

Automatic self-test of microwave

channel for proper operation.

PIR Supervision:

Automatic self-test of microwave

channel for proper operation.

Recommended Mounting Height:

Suggested height to mount processor

for optimal performance. Usually

important for pet immune applications.

Operating Temperature:

Temperature range at which the sensor

can be expected to provide adequate

protection. UL certification may have a

narrower range.

Input Voltage:

Voltage range at the terminal strip at

which the sensor will operate. UL may

have certified for a slightly narrower

range.

Swivel Bracket Options:

Brackets used to mount sensors in

installations that have special aiming

or mounting heights.

85

Environmental Adaption:

Microwave thresholds are adapted either

in hardware or digitally to remove the

effect of low level interference such as

ceiling fans.

Temperature Compensation:

Sensor automatically adjusts PIR

thresholds and/or other parameters to

adapt to change in ambient temperature

relative to human body temperature.

Standard: Compensates at ambient

temperatures below body temperature

Advanced: Compensates at ambient

temperatures both below and above

body temperature

Digital Fluorescent Light Filter:

Software algorithms provide infinite

rejection of microwave interference due

to fluorescent lights.

Analog Fluorescent Light Filter:

Hardware circuitry provides rejection

of microwave interferences due to

fluorescent lights.

Anti-Masking:

Detects intentional and accidental

blocking of the PIR optics.

Walk Test Mode:

Determines the coverage pattern and

functionality for both the PIR and

microwave channels, usually through

LED indicators.

PIR Sensitivity Adjustment:

Selectable option to change the PIR

process sensitivity, usually through a

DIP switch or jumper link.

Microwave Sensitivity Adjustment:

Selectable option to change the

microwave sensitivity and/or range,

usually through a potentiometer.

Vertical Adjustment:

Capability to adjust the vertical PIR

detector position relative to the optics,

usually through a vertical shift in the

PCB. Usually used to adjust range at

different mounting heights, or accurately

set the coverage pattern for different

lenses or mirrors.

Horizontal Adjustment:

Capability to shift the PIR zones left or

right by a few degrees. Usually used to

locate potential false alarm sources,

such as a heating vent between zones,

or to aim the optics in a particular

direction, such as a hallway.

Sensors MOTION DETECTORS

IS216T-CUR

Curtain PIR

Range: 33' x 5.5'

Dual slope temperature compensation

Microprocessor based

Selectable pulse count

Uniform sensitivity optics

Patented look down mirror

Patented Zero Clearance Black

Bug Guard

Tamper switch

Can be mounted on wall, ceiling

or horizontally

Top View

Side View

IS216

Entry Level PIR

Range: 40' x 40'

• Dual slope temperature compensation

Microprocessor based

Selectable pulse count

Uniform sensitivity optics

Patented look down mirror

Patented Zero Clearance Black

Bug Guard

UV tolerant lens

ALSO AVAILABLE:

IS216T - With tamper switch

Top View

Side View

1-877-518-6857

HARDWIRED PIRs

IS215T

Entry Level PIR

Range: 40' x 40'

Selectable pulse count

Uniform sensitivity optics

Patented look down mirror

Patented Zero Clearance Black

Bug Guard

Tamper switch

Top View

Side View

www.securitysystemslosangeles.us

86

Sensors MOTION DETECTORS

HARDWIRED PIRs

Top View Pet Immune Lens

Top View Long Range Lens

Side View Long Range Lens

Side View Pet Immune Lens

AURORA

Pet Immune PIR

Range: 35' x 45'

Pet immunity to 40 lbs.

Selectable pulse count

ASIC Signal Processing

Ultra-low current

• Totally silent relay

Tamper-proof design

Bidirectional Temperature

Compensation

ALSO AVAILABLE:

AURORA-T with tamper

AURORA-PK 6-pack

Honeywell designs pet immune sensors for almost any size pet

87

DETECTORS

IS2535

Selectable Pet Immune PIR Detector

Range: 35' x 40'

• 0, 40 or 80 lbs. selectable pet immunity

ALSO AVAILABLE:

IS2535T

Front case tamper

IS2535TC

Form C Relay

Alarm memory

Case and wall tamper

Side View

IS2560

Wide Area PIR Detector

Range: 60' x 85'

ALSO AVAILABLE:

IS2560T

Front case tamper

IS2560TC

Form C Relay

Alarm memory

Case and wall tamper

Top View

Sensors MOTION

HARDWIRED PIRs

Top View

Top View

Side View

IS2500

IS2500 Series Family of Passive

Infared Motion Sensors

45º terminal blocks

DIP switch programming

Spare EOL terminals

• Automatic Walk Test mode

Four sensitivity settings

(2.3m to 2.7) 7'5" to 9'

mounting height

Uniform sensitivity optics

Patented mirror look down

SIA PIR-01 false alarm compliant

Dual Slope temperature

compensation

Works with SMB10 family of swivel

brackets

Microprocessor controlled

• Totally silent tamper proof relay

ALSO AVAILABLE:

IS2500-PALK

Pet Alley Lens Kit

Top View

Side View

www.securitysystemslosangeles.us

IS25100TC

Long Range PIR Detector

Range: 100' x 20'

Form C relay

Alarm memory

Case and wall tamper

Side View

IS2500LT

Low Temperature PIR

Can be installed indoors where temperatures

are as low as -40° F (-40° C)

Includes 35, 60 and 100 foot lenses

Ideal for garages, sheds, warehouses, etc.

1-877-518-6857

88

Sensors MOTION DETECTORS

Top View

Wide-angle Lens

Side View

Wide-angle Lens

Side View

Long Range Lens

89

Top View

Pet Alley Lens

Side View

Pet Alley Lens

Top View

Long Range Lens

HARDWIRED PIRs

995

Recess Mount PIR Motion Sensor

Range: 40' x 56' (12m x 17m)

coverage pattern

Fits single gang box or can be recessed

into a wall

Built-in Signature Analysis pulse count

reduces false alarms

Horizontal and vertical adjustments

ALSO AVAILABLE:

995PA Pet Alley Lens, 40' x 56'

995LR – Long Range Lens, 70' x 8-1/2'

Sensors MOTION DETECTORS

HARDWIRED PIRs CEILING MOUNT

Top View

997

Ceiling Mount PIR

Motion Sensor

• Up to 36' (11m) diameter

coverage pattern

360˚ look-down capability

8' to 12' mounting height

Twist off cover for easy removal

Locally and remotely controllable

walk test LED

Cover tamper

Selectable pulse count

Top View

IS280CM

360° Ceiling Mount PIR

Range: 45' diameter at 10'

mounting height 50' diameter at

12' mounting height

Mounting heights from 8' to 12'

Low profile housing

Microprocessor-based signal

processing

Sealed optics chamber

Can be mounted on a single gang-box

Cover tamper

Selectable pulse count

www.securitysystemslosangeles.us

1-877-518-6857

Side View

Side View

90

Sensors MOTION DETECTORS

MOTION SENSOR ACCESSORIES

MOUNTING BRACKETS

For use with DT7000, DT6100, IS2500, IS215, 5894PI and 5800PIR series of detectors

SMB10T

Tampered Swivel Mount Bracket

(pack of five)

DT7000-PALK

Pet Alley Lens Kit

Pet Alley for DT7235, DT7435,

DT7500SN or IS2500SN

– Package of 10 lenses

Top View

Side View

91

SMB10C

Ceiling Mount Bracket

(pack of five)

DT7000-HSLK

High Security Lens Kit provides

35' x 40' area protection

Lenses to convert DT7235,

DT7435, DT7500SN or IS2500SN

to non-pet immune

Package of 10 lenses

SMB10

Swivel Mount Bracket

(pack of five)

LENS OPTIONS

DT7000-LRLK

Long Range Lens Kit provides

50' x 10' when used with

DT7450/DT7550, DT7500SN/IS2500SN or

35' x 8' when used with DT7235

or DT7435

Package of 10 lenses

Top View (35' x 8' Pattern)

Top View

Side View

Side View

Top View

(50' x 10' Pattern)

Side View

Pattern containment and pattern

shaping through K-Band

microwave technology

Advanced microprocessor-based

signal processing

PIR/microwave supervision

Infinite fluorescent light immunity

Continuous self-testing

Detects anti-mask attempts and

indicates with flashing lights

Uniform sensitivity options

Four sensitivity settings

Patented Zero Clearance

Black Bug Guard

Patented mirror look down

45º terminal blocks

Automatic walk test mode

Mounting height 7' - 9'

Smart contact disables/enables

fault/restore messages for PIR with

panels enabled for smart contact

High traffic inhibit delays second

alarm transmission for 5-15

seconds to help speed up the

V-Plex bus

1-877-518-6857

Sensors MOTION DETECTORS

V-PLEX MOTIONS

DT7500SN

V-Plex DUAL TEC Motion Sensor

Range: 50' x 60' (15m x 18m)

Selectable pet immunity 0/50/100

lbs. (0/23/45 kg); 35' x 40' (11m x

12m) - with optional lens included

Serial number addressable

Ideal for use in multi-tenant

buildings such as offices,

warehouses and mini-storage

facilities, machine shops, garages

and other industrial locations

Top View Pet Lens

Top View Wide Angle Lens

Side View Pet Lens

V-PLEX

Side View Wide Angle Lens

Please see page 119 for more

information on V-Plex.

www.securitysystemslosangeles.us

Los Angeles Security Systems

92

Sensors MOTION DETECTORS

V-PLEX MOTIONS

IS2500SN

V-Plex PIR Motion Sensor

Range: 50' x 60' (15m x 18m)

Selectable pet immunity 0/40/80 lbs.

(0/18/36 kg); 35' x 40' (11m x 12m) -

with optional lens included

Serial number addressable

Ideal for medium-to-large sized rooms

such as business lobbies, dining halls

and large offices

Use multiple units to cover larger areas

Dual-slope temperature compensation

Uniform sensitivity options

Four sensitivity settings

Patented Zero Clearance Black Bug Guard

Patented mirror look down

45º terminal blocks

Automatic walk test mode

Mounting height 7' - 9'

Smart contact disables/enables fault/restore messages for

PIR with panels enabled for smart contact

High traffic inhibit delays second alarm transmission for

5-15 seconds to help speed up the V-Plex bus

93

Top View Pet Lens

Top View Wide Angle Lens

Side View Pet Lens

V-PLEX

Side View Wide Angle Lens

Please see page 119 for more

information on V-Plex.

Sensors ACCESS CONTROL SENSORS

ACCESS CONTROL SENSORS

Request-to-Exit (RTE)

Honeywells family of

Request-to-Exit (RTE)

Access Control Sensors are

available in both basic and

full-featured models to suit

any access control

application. The quick-install RTEs are extremely

flexible, provide a generous amount of wiring room and

contain built-in internal shutters to guard against

tampering. All units share the same sleek,

sophisticated look, letting you match the aesthetics

of any room.

IS310

Request-to-Exit PIR

Adjustable relay time

Micro-based signal processing

Adjustable tamper proof shutters

provides precise target area

Terminal block design

Large wiring channel

DIP switch programmable

Two form C outputs

AVAILABLE IN:

IS310WH White

IS310BL Black

IS320

Request-to-Exit PIR

Same features as IS310 plus:

Piezo sounder

Door contact input

Reader/keypad/keyswitch input

Remote arming and sounder inputs

Door monitor and failsafe/secure modes

AVAILABLE IN:

IS320WH White

IS320BL Black

Internal Tamper-proof Shutters

DIP switch

IS320

Black

Bug Guard

Terminal Block Design

Sounder

Tamper

Adjustable

Volume Control

Large Wiring

Channel

www.securitysystemslosangeles.us

1-877-518-6857

94

Sensors ENVIRONMENTAL SENSORS

ENVIRONMENTAL SENSORS

TS300

Dual Temperature Sensor

Simultaneous operation of local and remote probes

• Local sensor 32˚ to 140˚ (0˚ to 60˚ C) +/-3˚ F (+/- 1. C)

• Remote probe -40˚ to 140˚ F (-40˚ to 6 C) +/-4˚ F (+/-2.2˚ C)

Programmable hysteresis prevents multiple alarms

Local audio alarm with silence time out

• Alarm memory (up to eight events)

Two programmable outputs

ALSO AVAILABLE:

T280R – Remote Temperature Probe

5821

Wireless Temperature Sensor

and Flood Detector

Five selectable temperature ranges

Local or remote temperature probe

Up to 10 year battery life

Transmits supervisory, tamper and low battery

Dimensions: 3-1/10" H x 1-3/5" W x 1" D

ALSO AVAILABLE:

T280R – Remote Temperature Probe

470PB Remote Water Probe

470-12

Water Sensor

Will detect water or any conductive nonflammable liquid

Ideal for placement by sump pumps, washing machines,

kitchens, etc., where flooding is a possibility

12VDC, low current drain

Form C (SPDT) output

Provided with two sensitivity settings for greater flexibility

Includes one remote water probe 470PB

11

Vibration Contact

Protects ceilings, walls, safes and glass

Adjustable sensitivity

Small and inconspicuous

AVAILABLE:

11WH White

11BR – Brown

T280R

T280R

470PB

95

Sensors PHOTOELECTRIC BEAMS

PHOTOELECTRIC BEAMS

Honeywell’s IntelliBeam sensors combine all the great features

of high-end photobeams in a cost-effective dual detector,

offering the ultimate protection at an incredible value. Available in

single and dual models, theres an IntelliBeam to suit any application.

IB100D

Dual Photoelectric Beams

100' range max. outdoor

IB200D

Dual Photoelectric Beams

200' range max. outdoor

IB250S

Single Photoelectric Beams

250' range max. outdoor

Active Infrared

Photoelectric Beams

Single and dual beam models with range up to 250'

Suitable for outdoor or indoor installations

Easy alignment features reduce installation time

Adjustable beam blocking time

Includes pole mount kit

www.securitysystemslosangeles.us

Los Angeles Security Systems

1-877-518-6857

96

Sensors SEISMIC VIBRATION SENSORS

SC100 SERIES SEISMIC VIBRATION SENSORS

Honeywells SC100 Series Seismic Vibration Sensors were designed

to protect high-value and high-risk assets in financial, retail and

other applications.

The SC100 model detects vibrations arising from

attempts to disturb solid structures including fixed ATMs,

bank vaults, safes and doors. The SC105 was designed

to safeguard freestanding objects like standalone ATMs,

gun cases, file cabinets, vending and ticket machines

and more. Both models can be installed in new or

existing security systems and offer a higher level of

protection and false alarm immunity than traditional

shock sensors, which often lack the ability to discriminate

between ambient vibration and real attacks.

FEATURES

Compact Size

Smallest available on market

so fits easier when space is

limited

Universal (ATM and Vault)

The SC100 can also be used

for ATMs and night deposit

safes by the simple change

of a DIP switch. No separate

sensors are required.

Remote Sensitivity

Reduction Input

Option to reduce sensor

sensitivity remotely during

maintenance on ATMs,

thereby reducing false alarms

Integrated Temperature Alarm

The SC100 and SC105 will

alarm if the temperature

exceeds 185° F. Additionally

the SC100 version alarms

when temperature rises

faster than 6° F per minute.

Diagnostic LED

Built-in tool easily selects

correct sensitivity; no time

consuming external tools

required

Selectable Sensitivity

Four different sensitivity

settings adapt to required

range and environmental

conditions

- Listed to UL639

- Listed to ULC-S306

97

SC100 series accessories

SC110

SC111

SC112

SC113

SC114

SC115

Sensors

SEISMIC VIBRATION SENSORS

SC100

SC105

Supply Voltage

Current Consumption

Adjustable Sensitivity

ATMs/Vault Selection

Delayed Triggering

Reduced Sensitivity Input

Detection Radius

Alarm Algorithm

Solid State Relay (Change Over)

Open Collector

Alarm Hold Time

Pry-off and Cover Switch

Low Supply Voltage Alarm

Temperature Alarm

Internal Functional Alarm

Remote Test

Reduced Sensitivity Input

8 16VDC, nominal 12VDC

Typical 3 mA @ 12VDC

4 levels by DIP Switches

by DIP switch

N/A

N/A

by DIP switch

For maintenance & Service: Active low (<1.5 VDC)

16.4'

9.8'

Highly sensitive to all known attacks

Similar to the SC100, but adjusted for

while rejecting known false alarm sources noisy environments such as public

by innovative filters and firmware

areas where ATMs may be located.

30VDC/100 mA; Type C

30 VDC/100 mA; Type A

Active low during alarm

Approx. 2.5 secs

30 VDC/100 mA

< 7 VDC

185° F, 23° F, 41° F

Stainless steel drill shield

Active low 1.5 VDC, test duration < 0.5 sec

Active low 1.5 VDC, test duration < 0.5 sec

Sensitivity reduction to 12.5 %

Specifications

Power Requirements

Sensitivity

Alarm Outputs

Sabotage Protection

Inputs

Installation Tool

Environmental

Conditions

Housing

A noise and alarm indicator is incorporated to support sensitivity setting.

Maximum Humidity

95% RH (non-condensing)

Operating Temperature

Storage Temperature

Environmental Class (VdS)

Housing Protection Category

Dimensions

Chassis and Cover

Color

Weight

Honeywell reserves the right to alter the specification of products without notice.

Applications

SC100

SC105

Vault Doors

ü

ATMs

ü

Night Deposit Safes

ü

Strong Room Vaults

ü

Modular Vaults

ü

Freestanding Safes

ü

Hatches

ü

Gates

ü

ü

Chests

ü

ü

Lobby ATMs

ü

Filing Cabinets

ü

Containers

ü

Vending Machines

ü

Ticket Machines

ü

ORDERING

DIP switches

Tamper switch

EOL resistor

jumpers

Terminal block

SC112

SC113

SC114

SC115

-40° F 158° F

-58° F 158° F

III

IP43

3.15" H x 2.36" W x .83" D

Die-cast metal

RAL7035 (light gray)

.5 lbs.

SC113 test

transmitter

connector

Diagnostic/

Alarm LED

Open collector

output setting

SC111 or SC112

connector for

accessories

Keyhole Protection Kit

Internal Test Transmitter

5.9' Armed Cable Kit (eight wires)

External Test Transmitter

SC100

SC105

SC110

SC111

Seismic Vibration Sensor (Safes/Vaults)

Seismic Vibration Sensor (ATMs)

Mounting Plate

Movable Mounting Kit

www.securitysystemslosangeles.us

Los Angeles Security Systems

1-877-518-6857

98

Sensors GLASSBREAK DETECTORS

GLASSBREAK DETECTORS

Your First Line of Defense

Dealers worldwide rely on Honeywell’s

FlexGuard® glassbreak detectors as a first line

of defense because they help keep intruders

where they belongoutside.

FlexGuard lets you provide your customers with the highest level of security, unmatched detection and

false alarm immunity without labor and installation headaches or costly service calls.

FlexGuard is also the industrys most versatile glassbreakthe only one to offer a choice of hardwired,

wireless or V-Plex polling loop technology for the ultimate in installation flexibility. It makes perimeter

protection as easy to provide and trouble-free as any other part of the system.

FlexGuard detectors mount virtually anywhereon walls, window frames or ceilingsand are UL and

ULC listed for all glass types, including plate, tempered, laminated, wired, film-coated and sealed

insulating. Rigorously challenged in test rooms built to exceed the toughest standards, it’s no wonder

there are more installed worldwide than any other brand of glassbreak.

99

Sensors GLASSBREAK DETECTORS

GLASSBREAK DETECTORS

FG1625

Glassbreak Detector

FlexCore processing

New hinged-case styling - nearly

180° opening

Four adjustable sensitivity settings

25' range/no minimum range

Remote test mode activation

Protected circuit board

ALSO AVAILABLE:

FG1615 - Non-adjustable with 15'

fixed range

FG1625T - Tamper/Form C Relay

FG1625F

Flush Mount Glassbreak Detector

FlexCore processing

Flush mount design covers any

single-gang electrical box

Four adjustable sensitivity settings

25' range/no minimum range

Remote test mode activation

Protected circuit board

ALSO AVAILABLE:

FG1525FD - covers double-gang

electrical boxes

5853

Wireless Glassbreak Detector

FlexCore processing

Set-up and performance identical to the FG1625

Hinged-case styling - nearly 180˚ opening

Easily replaceable batteries with up to 10 year

battery life

Four selectable sensitivity settings (max, medium,

low and lowest)

25' range/no minimum range

Covers all glass types

Remote test mode activation

Protected circuit board

www.securitysystemslosangeles.us

1-877-518-6857

FG1625RFM

Flush Mount Glassbreak Detector

FlexCore processing

Recess mounts in a 1" diameter hole in ceilings

or walls

Four adjustable sensitivity settings

Staggered terminals for easy wiring

25' range/no minimum range

Remote test mode activation

100

Sensors GLASSBREAK DETECTORS

GLASSBREAK DETECTORS

FG1625SN

V-Plex Glassbreak Detector

Ideal for any room where windows

are present

Use multiple units for larger areas

FlexCore processing

Serial number addressable*

Set-up and performance identical

to the FG1625

Four adjustable sensitivity settings

25' range/no minimum range

Remote test mode activation

Protected circuit board

*For use with Honeywell V-Plex addressable

control panels.

FG1608

Glassbreak Detector

with Magnetic Contact

FlexCore processing

Built-in magnetic contact

High/Low sensitivity setting

8' range/no minimum range

Remote test mode activation

Magnetic contact gap:

make gap = .9" min.;

break gap = 2.2" max.

FG1625R

Glassbreak Detector

FlexCore processing

Round case styling

Four adjustable sensitivity settings

25' range/no minimum range

Remote test mode activation

Protected PCB

ALSO AVAILABLE:

FG1625RT - Tamper/Form C Relay

Please see page 119 for more

information on V-Plex.

FG701

Glassbreak Simulator/Tester

Compatible with all IntelliSense and ADEMCO acoustic

Glassbreak Detectors

Remote test mode activation operates from 15' away*

Calibrated signal output to allow true range verification

Low battery announcement

Digitally produced glassbreak sound

*When used with FG1500 and FG1600

Series Glassbreak Detectors

101

V-PLEX

FG730

Glassbreak Detector

Dual Technology Flex-Audio Principle

Signal verification

30' range

GLASSBREAK DETECTORS

ASC-SS1

Shock Glassbreak Detector

Range: 8' maximum

Mounts directly on glass surface

Outstanding false alarm immunity

Epoxy sealed against moisture

and corrosion

• Glass types: plate, tempered,

laminated, wired, coated,

double-pane

Sensors GLASSBREAK DETECTORS & INDOOR SOUNDERS

5800SS1

Wireless Shock Glassbreak Sensor

Perfect for kitchens, bathrooms,

skylights and occupied areas

Mounts directly on glass surface

with 3M adhesive tape

10' detection range

Pull battery tab and enroll; no need

to remove cover during installation

WAVE

Speaker

Attractive patented design fits

single gang wall plate

Snap-open hinged case cover for

faster installation

Two positions terminal block

eliminates splicing and soldering

Corner or ceiling mounting with no

additional brackets or hardware

Channeled or horizontal mounting

for great versatility

8 ohms/15 watts

WAVE2

Two-Tone Siren

Attractive patented design fits

single gang wall plate

Snap-open hinged case cover

for faster installation

Louder (106 dB) dual tone siren output

Terminals eliminate soldering and

splicing

Corner or ceiling mounting with

no additional brackets or hardware

Channeled case back for

convenient wiring access

UL Commercial Burglary

INDOOR SOUNDERS

WAVE2PD

Two-Tone Piezo Dynamic Siren

105 dB @ one meter

Half the weight of standard sirens

1/3 the current requirements of

standard sirens

• Terminals eliminate soldering

and splicing

Snap-open hinged case cover

for faster installation

Key:

- Commercial

- Residential

- Outdoor Use

www.securitysystemslosangeles.us

Los Angeles Security Systems

1-877-518-6857

102

WIRELESS SOUNDER

5800WAVE

Wireless Siren

Plug into any standard duplex receptacle

95 dB @ 3 meters

12 hour battery backup

Ready to mount - no disassembly required

Transmits status, tamper, low battery, supervisory

and AC signals

Temporal pulse sounding

Sensors INDOOR SOUNDERS AND SOUNDING DEVICES

INDOOR SOUNDERS

WAVE2F

Two-Tone Flush Mount Siren

106 dB @ 12VDC @ one meter

Same performance as Wave2

Unique hinged case design allows for

installation without disassembly

Fits a standard double gang electric box

Easy terminal block wire connections

Attractive new design

SOUNDING DEVICES

748

Dual Tone Siren

Extremely loud (119 dB)

Smaller - mounts directly

to wall or 4" electrical box

Dual tone output - steady

and warble

Ready to mount -

no disassembly required

Tamper proof and weather

resistant

Attractive, can be used

indoors or outdoors

Snap on trim ring

conceals screws

748LC

Dual Tone Siren

• Low current draw, 550mA @

12VDC (112 dB)

Smaller - mounts directly

to wall 4" electrical box

Dual tone output -

steady and warble

Ready to mount -

no disassembly required

Tamper proof and weather

resistant

Attractive, can be used

indoors or outdoors

Snap on trim ring

conceals screws

749

Speaker/Horn

8 ohms/20 watts

(25 watts peak)

Smaller - mounts directly

to wall or 4" electrical box

Ready to mount -

no disassembly required

Attractive, can be used indoors

or outdoors

Snap on trim ring

conceals screws

103

Sensors SOUNDING DEVICES

SOUNDING DEVICES

747PD

Two-Tone Piezo-Dynamic

Indoor Siren

105 dB @ one meter

Half the weight of

standard sirens

1/3 the current

requirements

of standard sirens

Terminal strip eliminates

soldering and splicing

Snap-open hinged case

cover for fast installation

746F

Indoor Flush Mount

Speaker

Flush mount

15 watts continuous,

20 watts peak/8 ohms

Double polyurethane

coated voice coil -

prevents corrosion

Mounting hardware

included

Heavy duty magnet

747F

Self Contained, Flush

Mount Indoor Siren

95 dB @ 12VDC

Flush mount

Two tones - steady

and warble

High quality mylar cone

Heavy duty magnet

Durable ABS plastic

Attractive designer case

Hardware included

713

High Power Speaker

Powerful 40 watts,

8 ohm speaker

Weather resistant housing

Ideal for indoor and

outdoor applications

Jacketed 3-conductor

lead included tamper loop

747

Self Contained

Indoor Siren

95 dB @ 12VDC

Two tones - steady and

warble driver is built-in

Durable ABS plastic

15 watt power rating

Easy mounting with

hardware included

High quality mylar cone

Heavy duty magnet

702

Self-Contained

Electronic Siren

118 dB @ 12VDC

6 to 12VDC combination

speaker and siren driver

Dual tone - warble or

steady

Enclosed wires

30 watt power rating

Protective cabinet

available 743BE

Built-in Tamper Plate

protects wires from attack

746

Indoor Speaker

Easy to mount on wall

15 watts continuous,

20 watts peak/8 ohms

Double polyurethane

coated voice coil -

prevents corrosion

Mounting hardware

included

Heavy duty magnet

719

Self-Contained

Electronic Siren

115 dB @ 12VDC @ 10 feet

Combination speaker and

siren driver

Dual tone - warble and steady

6 to 12VDC power input

Small size - 5" diameter

Indoor or outdoor use

Weather resistant, high

impact construction

ALSO AVAILABLE:

705-820 20 watt speaker made

of durable ABS plastic

www.securitysystemslosangeles.us

1-877-518-6857

104

Sensors SOUNDING DEVICES

SOUNDING DEVICES, SIREN DRIVERS, BELLS & BOXES

735BE

Cabinet Including Speaker

Includes 705-820, 8 ohm, 20 watt speaker

Tampered cabinet

Reduced installation time

ALSO AVAILABLE:

For tamper provision, use the 955WH and 28-2 bracket

1011BE12M

Motorized Bell in Box

10" motorized bell

Low current draw only 100 mA current draw at 12VDC

Fully tampered for protection from attempts to open, drill

or chisel through cabinet

AB12M

Motorized Bell in Box

Required on UL Grade A installation

Motorized bell with only 100 mA current draw at 12VDC

Extra heavy steel

10" underdome bell

Two tamper switches

Insulated inner box

Fully tampered for protection from attempts to open,

drill or chisel through cabinet

745VSD3

Trilingual Voice Siren Driver

Capable of verbally announcing burglary, fire

and carbon monoxide conditions

Can speak system status in three languages -

English, Spanish or French

Fully configurable (interchangeable language

and siren tones)

ETL listed (when used with a 32 ohm speaker)

ALSO AVAILABLE:

745VSD3PK2 Trilingual Voice Siren Driver Kit

746-32 32 ohm, 15 watt Indoor Speaker

105

Key:

- Commercial

- Residential

- Outdoor Use

Sensors SURFACE MOUNT CONTACTS

SURFACE MOUNT CONTACTS

Honeywells unique Ammo Box packaging provides security

professionals with an entirely new level of installation convenience and

inventory control. Each Ammo Box contains an “ammo belt” of 50 individually

packaged magnetic contacts complete with screws, spacers and covers.

Simply tear off the perforated, incrementally numbered bag. The number on the

next bag indicates the quantity left in the Ammo Box.

Ammo Box

Individually Packaged Magnetic Contacts

50 individually packaged contacts per Ammo Box

Perforated bags let you take only as many as needed

Each bag contains all needed parts, including screws, spacers, etc.

Sequential numbers on bag tell you how many are left in the box

Available in

Ammo Box

Look for contacts featuring

the Available in Ammo Box”

symbol throughout this catalog!

Available in

Ammo Box

Available in

Ammo Box

www.securitysystemslosangeles.

7939WG

Magnetic Contact

Ideal for residential or commercial use

Standard gap: 1-1/4" (32mm)

Spacers, covers and screws included

7939-2

Magnetic Contact

SPDT (Form C) Contact

Standard gap: 1" (25mm)

Spaces, covers and screws included

Cover conceals end of line resistor (EOL)

7940

Universal Magnetic Contact

The most versatile mounting options

of any contact available screw

mount, adhesive mount or recess

Super wide gap of 2" (51mm) is

standard or 1" (25mm) end-to-end

recessed

Insulation displacement terminals

eliminate stripping or soldering, just

insert wires and tighten

Recess adapter plugs included

ALSO AVAILABLE:

7939WG-WH White

7939WG-BR – Brown

7939WG-GY Grey

ALSO AVAILABLE:

7939-2WH White

7939-2BR – Brown

7939-2GY – Grey

ALSO AVAILABLE:

7940WH White

7940BR Brown

106

Sensors SURFACE MOUNT CONTACTS

SURFACE MOUNT CONTACTS

Available in

Ammo Box

Available in

Ammo Box

Available in

Ammo Box

Patent # 6,135,826

Available in

Ammo Box

943WG

Mini Magnetic Contact

Standard gap: 1" (25mm)

12" (30cm) leads

Self-adhesive or screw mount

945T

Miniature Magnetic Contact with

Screw Terminals

Screw mount or adhesive mount

Screw terminals eliminate wire splicing

and soldering

Standard gap: 1-1/8" (29mm)

PAL-T

Magnetic Contact

• Patented hinged case coverno

loose parts

• Concealed screw terminals eliminate

splicing and soldering

• 1-1/8" (29mm) gap makes installation

a snap

• Screw mount or adhesive mount

• Six wire entry points for mounting

versatility

• Conceals EOL resistor

940

Magnetic Contact

Miniature size perfect for homes

and offices

Attractive cover keeps mounting

screws and terminals

screws hidden

Standard gap: 3/4" (19mm)

Complete with spacers and

mounting screws

Cover hides EOL resistor

ALSO AVAILABLE:

943WG-WH White

943WG-BR Brown

943WG-WH-M Extra magnet (10 pack)

943WG-BR-M Extra magnet (10 pack)

ALSO AVAILABLE:

945T-WH White

945T-BR – Brown

945WH-M Extra magnet (10 pack)

945BR-M Extra magnet (10 pack)

ALSO AVAILABLE:

PAL-T-WH – White

PAL-T-BR – Brown

PAL-M-WH Extra magnet (10 pack)

PAL-M-BR Extra magnet (10 pack)

ALSO AVAILABLE:

940WH White

940BR Brown

107

Sensors SURFACE MOUNT CONTACTS

SURFACE MOUNT CONTACTS

950

Magnetic Contact

Completely hides mounting screws

and terminals

Standard gap: 1-3/4" (45mm)

Ideal for concealing end-of-line

resistor (EOL)

945

Adhesive Mount

Magnetic Contact

Adhesive mount

Standard gap: 1-1/4" (32mm)

External test points standard

15 foot (4.6m) leads

Package quantity five per bag

949

Magnetic Contact with Leads

Screw mount

External test points standard

Standard gap: 1-1/4" (32mm)

15 foot (4.6m) leads

Complete with spacers and

mounting screws

www.securitysystemslosangeles.us

Los Angeles 1-877-518-6857

ALSO AVAILABLE:

950BR Brown

950GY Grey

ALSO AVAILABLE:

945WH White

945BR Brown

945WH-M Extra magnet (10 pack)

945BR-M Extra magnet (10 pack)

ALSO AVAILABLE:

949WH White

949BR Brown

108

Sensors RECESS MOUNT CONTACTS

RECESS MOUNT CONTACTS

Truly one-of-a-kind, Honeywell’s Staggered T Series contacts provide you with a whole new level of

convenience and flexibility. By staggering the terminals, we discovered a way to fit larger screw terminals

without altering the industry-standard 3/8" diameter case size and without having to use any special screwdrivers.

The result? Easier wiring and faster installations.

• Staggered T Terminals ensure a secure

electrical connection

ALSO AVAILABLE:

944T-WH White

944T-BR – Brown

• Staggered T Terminals ensure a secure

electrical connection

ALSO AVAILABLE:

944TRE-WH White

PROBTM 10 pack of button magnets

Staggered T terminals ensure a secure

electrical connection

ALSO AVAILABLE:

944TSP-WH White

944TSP-BR – Brown

944SP-WH White with leads

944SP-BR Brown with leads

944WH-M Extra magnet (10 pack)

Staggered T terminals ensure a secure

electrical connection

ALSO AVAILABLE:

947-75TWH White

947-75TBR – Brown

947-75WH White with 5' leads

947-75BR Brown with 5' leads

Staggered T terminals ensure a

secure electrical connection

ALSO AVAILABLE:

955PST-WH White

ALSO AVAILABLE:

956RPT-WH White

956RPT-BR – Brown

956WH-B – With 18" (46cm) leads white

109

A

Available in

Ammo Box

Available in

Ammo Box

Available in

Ammo Box

Available in

Ammo Box

944T

3/8" Magnetic Contact with

Screw Terminals

3/8" (10mm) diameter press fit design

Screw terminals eliminates wire

splicing and soldering

Standard gap: 3/4" (19mm)

944TRE

3/8" Magnetic Contact with

Terminals and Rare Earth Magnet

3/8" (10mm) diameter press fit design

Rare Earth button magnet

Standard gap: 1/2" (13mm)

944TSP

3/4" Contact with Terminals and

3/8" Magnet

3/4" (19mm) diameter switch for easier

wiring; supplied with 3/8" (10mm)

diameter magnet

Standard gap: 3/4" (19mm)

947-75T

Steel Door Magnetic Contact

with Terminals

3/4" (19mm) recessed with 3/4" (19mm)

magnet and terminals

1/2" (12mm) gap in steel

955PST

3/4" Recessed Plunger Contact

with Terminals

Broad face plunger distributes impact

more evenly

956RPT

3/4" Recessed Roller Plunger

Contact with Terminals

Shorter body for easier recess fit

Full 180° activation

Staggered T terminals ensure a secure

electrical connection

RECESS

Available in

Ammo Box

MOUNT CONTACTS

951WG

3/8" Diameter Miniature Press Fit

Magnetic Contact

With a 3/4" (19mm) long magnet, the

951WG is ideal for casement windows,

sliding windows and other thin frame

applications

Standard gap: 1-1/4" (32mm) the

largest gap of any mini 3/8" (10mm)

contact

12" (30cm) leads are standard

PRO51BTM

3/8" Stubby Recessed Contact

with Rare Earth Button Magnet

Stubby 3/8" (10mm) press fit with button

magnet fits even the tightest spots

Powerful rare earth magnet is easy to

install with screw or adhesive

Standard gap: 1/2" (13mm)

Magnet screw hole is convex for

smooth flush fit

ALSO AVAILABLE:

951WG-WH White

951WG-BR – Brown

ALSO AVAILABLE:

PRO51BTMWH White

PROBTM 10 pack button magnets

Sensors RECESS MOUNT CONTACTS

www.securitysystemslosangeles.us

Los Angeles Security

1-877-518-6857

110

Sensors RECESS MOUNT CONTACTS

RECESS MOUNT CONTACTS

MPS95WG

3/8" Stubby Contact with 14"

Magnet

Standard gap: 1-14" (32mm)

12" (30cm) leads

MPS70WG

3/4" Steel Door Contact

Standard gap: 1-14" (32mm)

5/8" (16mm) gap for steel

12" (30cm) leads

MPS73WG

3/4" Contact with 3/8" Magnet

Standard gap: 1-14" (32mm)

12" (30cm) leads

947

1" Steel Door Magnetic Contact

The clean look of recessed contacts

ALSO AVAILABLE:

MPS95WGW White

ALSO AVAILABLE:

MPS70WGW White

ALSO AVAILABLE:

MPS73WGW White

ALSO AVAILABLE:

947WH White

947BR Brown

coupled with robust features that

meet the requirements of steel doors

1" (25mm) diameter with “lock-in

mounting caps

Standard gap 1/2" (13mm) in steel

5' (1.5m) zip cord leads are standard

Includes 3/8" diameter by 1" long

bare magnet

111

Sensors COMMERCIAL CONTACTS

COMMERCIAL CONTACTS

During lightning strikes or power surges, voltage can flow through the reed switch of a magnetic

contact fusing the switch and rendering windows and doors unprotected. For the surge protection

you need, look to Honeywell’s robust XTP contacts.

968XTP

XTP High Security Switch

Defeat-resistant from external magnetic tampering

Includes tamper switch to notify of removal

XTP surge protection (up to 2400VDC)

Suitable for Indoor/Outdoor use

Epoxy sealed for protection from moisture and corrosion

3' (91cm) stainless steel armored cable

Gap of 7/16" (11mm) is standard

Completely immersion proof

(epoxy sealed)

3' (91cm) armored cable is standard

• Wide gap of 2-1/2" (64mm) is standard

ALSO AVAILABLE:

960 SPST Switch (Form A)

960-2 SPDT Switch (Form C)

ALSO AVAILABLE:

7945WH White

7945BR Brown

7945GY Grey

7945-2GY SPDT Switch (Form C)

ALSO AVAILABLE:

MPS80WGW White

1-877-518-6857

960

XTP Surface Mount Magnetic

Contact

XTP contacts withstand surges up to

2400VDC

The toughest commercial contact

ever developed

Rugged aluminum housing

7945

XTP Surface Mount Magnetic

Contact with Leads

XTP contacts withstand surges up to

2400VDC

6' (1.8m) CLII cable is standard

Completely immersion proof

(epoxy sealed)

• Wide gap of 2-1/2" (64mm) is standard

MPS80

Surface Mount Contact

with Terminals

Standard gap 2" (51mm)

Industrial surface mount

Includes spacers and

mounting screws

www.securitysystemslosangeles.us

Los Angeles Security Systems

112

Sensors COMMERCIAL CONTACTS

COMMERCIAL CONTACTS

958

Overhead Door Magnetic Contact

Adjustable magnet with L bracket

24" (61cm) armored cable is standard

Standard gap: 2-3/8" (60mm) minimum

Epoxy sealed for protection from

moisture and impact

Rugged Shock Absorber” design

protects reed against flex or damage

to housing

ALSO AVAILABLE:

958 SPST Switch (Form A)

958-2 SPDT Switch (Form C)

958M – Spare magnet

959

XTP Overhead Door Contact

XTP contacts withstands surges up to 2400VDC

The standard for OHD contact applications

Adjustable magnet with L bracket

Standard gap: 2" (51mm)

MPS51C

Overhead Door Contact

Standard gap 2" (51mm)

Form C

24" (61cm) armored cable

Adjustable magnet bracket

MPS52

Overhead Door Contact

Standard gap 2" (51mm)

24" (61cm) armored cable

Adjustable magnet

113

Sensors V-PLEX

V-PLEX

Honeywells patented V-Plex polling loop technology literally redefines price and performance on a

simple pair of wires. By utilizing only two wires instead of four, V-Plex offers significant advantages over conventional

four-wire installations—providing economical expansion of peripheral devices and point identification to your central

monitoring station.

Standard gap: 1-1/4" (32mm)

5' (1.5m) CLII jacketed cable

Epoxy sealed for protection from

moisture and impact

AVAILABLE IN:

4939SN-WH White

4939SN-BR – Brown

4939SN-GY – Gray

Press fit design in 1/2" (12mm)

diameter case

Factory installed 5' (1.5m) zip cord

leads saves time

• Standard gap: 7/8" (22mm)

end-to-end

ALSO AVAILABLE:

4191SN-WH White

4191WA 3/4" (19mm) adapter for

steel doors

Serial number addressable

Standard gap: 2" (51mm)

24" (61cm) armored cable

Epoxy sealed for protection from

moisture and impact

V-PLEX

4939SN

V-Plex Addressable Surface

Mount Contact

Ideal for exposed applications for

wood-framed and metal-framed

doors and windows

Programmable surface mount

contact

Serial number addressable

4191SN

V-Plex Recessed Magnetic Contact

• Ideal for concealed applications for

wood-framed doors and windows

• Add the optional 4191WA for

metal-framed doors and windows

• Recessed contact with built-in RPM

(Remote Point Module)

Serial number addressable

4959SN

V-Plex Addressable Overhead

Door Contact

Ideal for roll-up doors in shipping

and receiving bays and garage

applications

Rugged aluminum housing and

adjustable L bracket type magnet

www.securitysystemslosangeles.us

Los Angeles Security Systems

Please see page 119 for more

information on V-Plex.

1-877-518-6857

114

TAMPER SWITCHES, BRACKETS AND PRE-WIRE PLUGS

Sensors

TAMPER SWITCHES, BRACKETS, PRE-WIRE PLUGS & FOIL CONTACT SWITCHES

116

913WH

Plunger switch for

White 3/4" pre-wire plug

closed circuit alarms

(fits 3/4" (19mm) hole)

28-2

Bracket for the 955WH

tamper switch

(mounts to alarm can)

112 and 28

Shown together

112

Plunger switch for

closed circuit alarms

955WH

Plunger switch for

alarm cabinets

920

L-bracket for 950

magnetic contact

28

Bracket for the 112

tamper switch

955WH and 28-2

Shown together

FOIL CONTACT SWITCHES

367

Foil contact

AVAILABLE IN:

367WH White

367BR Brown

DOOR CORDS

64

Retractable Slimline Stretch Door Cord

• Solves the problem of carrying protective circuits off double

hung-windows, sliding doors and other movable fixtures

AVAILABLE IN:

64WH White

380

Spacer for 367

AVAILABLE IN:

367WH White

367BR Brown

69